Adjusting BIOS Settings on Mobo

Sazar

F@H - Is it in you?
Staff member
Political User
Joined
Apr 12, 2002
Messages
14,905
yah that vcore is a little on the uber high side :D
 

Sazar

F@H - Is it in you?
Staff member
Political User
Joined
Apr 12, 2002
Messages
14,905
Teddy said:
We're getting there!! The CPU seems sorted (thank you all...so far!!!!)

Now, see the pics, how do i get my memory to operate at 400mhz? I lowered the timings (read somewhere else while googling) and it booted to Windows XP fine...but the memory is now too slow. MUYA - will go away and lower the Voltage now...oops.

Edit - MAYA - will go and try those memory timings you suggested...

Pic 1 - CPU
Pic 2 - Memory
Pic 3 - Mobo
lol.. if only you had said you had upped the vcore :D

woulda made life a lot easier :cool:
 

MUYA

OSNN Junior Addict
Joined
Feb 17, 2004
Messages
37
Do also check your DRAM:FSB Ratio. Seems you have 5:4 which means if you fsb is at 200mhz the ram will run at 250Mhz! which will burn your memory out. So set that to 1:1 if you are running 200Mhz and your memory is 200mhz capable.
 

MUYA

OSNN Junior Addict
Joined
Feb 17, 2004
Messages
37
With nForce 2 mobo running memory synchronous to the fsb has the highest performance gains as opposed to running the memory asyncronous with the fsb.
 

MUYA

OSNN Junior Addict
Joined
Feb 17, 2004
Messages
37
Am i doing a good job of getting my postage count up or what :D hehehehe
 

Sazar

F@H - Is it in you?
Staff member
Political User
Joined
Apr 12, 2002
Messages
14,905
MUYA said:
Am i doing a good job of getting my postage count up or what :D hehehehe
yeah ya git :D

got a ways to catch up to me on your board though numbnuts :cool:
 

MUYA

OSNN Junior Addict
Joined
Feb 17, 2004
Messages
37
Duhh... Saz, I just joined u fanny. ANyways not always an active participant in forums, just to help out. U know that fartknocker!
 

Teddy

Boogie Nights...!
Joined
Jul 5, 2002
Messages
1,551
My memory is:
"Corsair XMS 256Mb DDR 400MHz PC3200 Cas 2 - Low Latency Platinum"

two of em...if that helps.
 

Sazar

F@H - Is it in you?
Staff member
Political User
Joined
Apr 12, 2002
Messages
14,905
the timings you can get should be 2-3-3-6 teddy... @ 400mhz...
 

Shamus MacNoob

OSNN Veteran Addict
Political User
Joined
Jan 8, 2002
Messages
4,199
On that mobo you will get better performance at something like 10-2-2-2- or 11-2-2-2 the Tras set to low on nforce duel channel boards has been covered mega times in all forums.. set your ram to 100% or 1:1 and it should be fine if you need to you could add a little voltage to the ram those sticks can handle 2.8 volts without a problem try stock vdimm first and if it is not stable add .1 and try again
 

Teddy

Boogie Nights...!
Joined
Jul 5, 2002
Messages
1,551
My memory is at 2.7v at the mo and wont go any higher by the looks of things.

I tried the timings of 10 2 2 2 but xp wouldnt load. Im off to try 11 2 2 2 ...
 

Shamus MacNoob

OSNN Veteran Addict
Political User
Joined
Jan 8, 2002
Messages
4,199
Teddy said:
My memory is at 2.7v at the mo and wont go any higher by the looks of things.

I tried the timings of 10 2 2 2 but xp wouldnt load. Im off to try 11 2 2 2 ...

I need 2.8 vdimm and 1.825 vcore to reach 210 x 11.5 if thats any help and I use 2.5 cas try maybe just for a test 9 - 3 - 3 -3 at 2.8 vdimm and see what gives also dont be afraid to give a little vcore even if 1.65 is default some mobo's dont deliver the proper volts .. also in passing what do you have for a PSU 12v rails and 5v rails the AMPS is what I am looking for
 

Shamus MacNoob

OSNN Veteran Addict
Political User
Joined
Jan 8, 2002
Messages
4,199
The 10 or 11 tras should not affect windows loading but 2 cas is tight 2.5 you have a better chance I have used cas 3 and tested and there really is not much of a difference in performance but there is in stablilty depending on the ram in use and again the PSU is very important here
 

Teddy

Boogie Nights...!
Joined
Jul 5, 2002
Messages
1,551
Oops...by the way, i did get this sorted! Many thanks to you all for your help! Much appreciated!

Info from AIDA32:
This Computer MSI K7N2 Delta-L (MS-6570G) nForce2-SPP 3036 MB/s

Yay :)
 

Gary Pandher

OSNN Senior Addict
Joined
Mar 9, 2004
Messages
884
the ram
is working at 200 fsb
ddr
double data rate
200 * 2
equalz 400
memory is working at the right speed
isn't it????...
i think thas how it works
 

Members online

No members online now.

Latest profile posts

Perris Calderon wrote on Electronic Punk's profile.
Hey ep!

All good with me, applying for microsoft mvp right now, should have done this a while ago.

Notifications don't work, I only found your response by comming back to hunt up some threads, if you want, give me your email address so we can keep in touch easier, mine is perriscalderon at gmail
Perris Calderon wrote on Electronic Punk's profile.
Ep, glad to see you come back and tidy up...did want to ask a one day favor, I want to enhance my resume , was hoping you could make me administrator for a day, if so, take me right off since I won't be here to do anything, and don't know the slightest about the board, but it would be nice putting "served administrator osnn", if can do, THANKS

Been running around Quora lately, luv it there https://tinyurl.com/ycpxl
Electronic Punk wrote on Perris Calderon's profile.
All good still mate?
Hello, is there anybody in there? Just nod if you can hear me ...

Forum statistics

Threads
61,975
Messages
673,270
Members
89,047
Latest member
hargadetocline