Valid net speed tweak?

[leedogg]

I found this little tidbit and was wondering if anybody knows if its a valid internet speed tweak? Supposedly sites load faster..

Go to Run, and write:
cmd.exe "enter"

c:\>netsh "enter"
netsh>routing
routing>ip
routing ip>dump

And then it will list off a whole bunch of need stuff.
If you scroll back towards the top of the dump,
you'll notice this little line:
( set filter name="Local Area Connection" fragcheck=disable )

It's a packet defragger. Why it's disabled by default is beyond me.
So here's what we do:

ruoting ip>set filter name="Local Area Connection" fragcheck=enable

And you should be good to go...

 

[NetRyder]

Just enabled it on mine. But the connection is already so fast, I can't really notice a difference. Perhaps someone with a lower bandwidth connection might see a change.
Anybody?

 

[Xie]

wouldn't checking to see if packets were fragmented actually slow your speeds as there is more overhead?

 

[woutertal]

Hi there!

This is my first post. Congrats to everybody with a great forum. 🙂

I have been testing this tweak on a 1-way satellite system with 1 MB/s in a LAN, for about two weeks. On the LAN interfaces I cannot detect any change in speed. On the DVB interface though, I have a consistent speed increase of about 2% max. In bad weather conditions, this increase can be close to 6%.

Can any sat users confirm this? Also, there doesn't seem to be any info on the enire web about this particular command. If anybody has any information, please post it. 😎

 

[chaos945]

This bad boy will make life easier for those not wanting to go into DOS and muck about with keys. Enjoy!

@echo off
CLS
GOTO BEGIN
:AGAIN
CLS
ECHO "%USER_INPUT%" cannot be set
:BEGIN
ECHO ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ECHO º THIS IS YOUR LIST OF DEVICES INPUT THE DEVICE YOUW WANT TO CHANGE º
ECHO ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
NETSH ROUTING IP DUMP >%SYSTEMDRIVE%\DUMP.TEMP
FINDSTR "fragcheck" %SYSTEMDRIVE%\DUMP.TEMP
ECHO.
@SET /P USER_INPUT="On which devices do you want to enable fragcheck? "
	@IF /I "%USER_INPUT%"=="EXIT" GOTO END
	@IF /I "%USER_INPUT%"=="" GOTO AGAIN
netsh routing ip set filter name="%USER_INPUT%" fragcheck=enable
IF %ERRORLEVEL% GEQ 1 GOTO AGAIN
ECHO "filter name=%USER_INPUT% fragcheck=enable"
PAUSE
:END
CLS
IF EXIST %SYSTEMDRIVE%\DUMP.TEMP DEL %SYSTEMDRIVE%\DUMP.TEMP

 

[j79zlr]

As long as you set the MTU, MSS, and receive window sizes correctly, fragmentation shouldn't be a problem.