CPU Fan

chaos945

OSNN Senior Addict
Joined
10 Feb 2003
Messages
934
Well I've switched my CPU fan over to a molex connector as well as all the other fans in my case. Anyone see any problems that could arise by doing this, besides spinning lower? Anyhow temps are not aweful, and I'm not overclocking I just CAN'T STAND TO LISTEN TO MY COMPUTER TAKE OFF ANYMORE! One of these days I'm going to just have to break down and buy silent harddrives and a new CPU cooler, these two things are making most of the noise in my case. 2 Maxtor hard drives 7200RPM, ATA100/133, 40gb,30gb, CPU fan is stock for AMD Athlon 2100+ TB.
 
It's not going to make any difference at all. The RPM's of the fans should be the same too. You should get a fan controller if you want to slow them down.
 
Dubbin1 said:
It's not going to make any difference at all. The RPM's of the fans should be the same too. You should get a fan controller if you want to slow them down.

or you could try and remove any obstructions from in front of your case fans, such as the grills, all those little nasty holes in that fans take the air from. i have since removed all mine... and it is is bit quieter... another thing, just invest in some 120mm fans... those kick ass and move a lot of air quieter.
 
where?

hey where do you install 120mm fans in a case? in the back?
 
I installed a 120mm fan in the FRONT of my case. There are 2 80's in the back, but it depends on the case or if you want to mod the one you have.
 

Members online

No members online now.

Forum statistics

Threads
62,021
Messages
673,242
Members
5,642
Latest member
osipov
Back
Top