Problem installing XP on SCSI drive

M

maxyeo

Guest
I can't install WinXP on my Seagate SCSI drive. I'm using Adapted 2940UW controller when come to partitation it says "Unknow Drive"
 
You probably need to install a scsi driver for the drive before XP can see it. if you notice when XP goes to install and such it will say press F3 or some other F key I can't remember if you need to install a scsi or raid driver now...your probably gonna have to goto the company's website, get the driver for you card, then put it on a floppy and install the driver at that XP screen before installation can proceed.
 
Originally posted by Qumahlin
You probably need to install a scsi driver for the drive before XP can see it. if you notice when XP goes to install and such it will say press F3 or some other F key I can't remember if you need to install a scsi or raid driver now...your probably gonna have to goto the company's website, get the driver for you card, then put it on a floppy and install the driver at that XP screen before installation can proceed.

:) thanks for the reply ..... I already did that and when winxp read the floppy disk its says the driver is same on the winxp cd ... and still shows the same error "Unknown Drive"
 
XP onto scsi drive

Make sure your scsi 2940UW BIOS is enabled and set the host card to "default" settings. Hit ctrl+A when scsi host is found during boot and open the scsi utilities. Check that bios is enabled, boot device is set to ID# 0 (make sure your drive is ID'd to ID#0). scan the scsi bus to make sure the hard drive is detected. Make damn sure your drive has "terminal power" jumper and you have an "active" terminator on the end of the ribbon. SCSI hard drive are NOT self terminating! Don't forget that the 2940UW card can only run at 40mbps MAX. I can supply more more help if you supply more details---email me for any more help. dick4711@mchsi.com
PS: XP has all of the Adaptec SCSI Host drivers included: no need to select F6 during setup. You also must use the microsoft six boot disks to load XP on a scsi hard drive. Third part single boot disks will NOT load onto a scsi drive, and won't allow NTFS partitions.
 

Members online

No members online now.

Latest profile posts

Also Hi EP and people. I found this place again while looking through a oooollllllldddd backup. I have filled over 10TB and was looking at my collection of antiques. Any bids on the 500Mhz Win 95 fix?
Any of the SP crew still out there?
Xie wrote on Electronic Punk's profile.
Impressed you have kept this alive this long EP! So many sites have come and gone. :(

Just did some crude math and I apparently joined almost 18yrs ago, how is that possible???
hello peeps... is been some time since i last came here.
Electronic Punk wrote on Sazar's profile.
Rest in peace my friend, been trying to find you and finally did in the worst way imaginable.

Forum statistics

Threads
62,015
Messages
673,494
Members
5,621
Latest member
naeemsafi
Back