Help Error Log Messages & CD burner

[keta]

I have been having problems burning ISO images, (win xp, Aopen crw 2440, nero 5572). I continually get blue screen stop error messages during or on completion of burning an ISO image.

I have checked my drivers, my ram, installed relevent updates and patches but can't fix the problem.

I had a look at xp error log and error the following report s occurs 200 + times throughout the error log

"AMLI: ACPI BIOS is attempting to read from an illegal IO port address (0xcfc), which lies in the 0xcf8 - 0xcff protected address range. This could lead to system instability. Please contact your system vendor for technical assistance. "

"Cdrom The device, \Device\CdRom0, has a bad block. "

Can anyone tell me what these error messages mean?

Thanks
Al

 

[RobbieSan]

ACPI error

I had the same problem 'ACPI error' and it kept crashing my system. The problem is your BIOS is trying access hardware and XP will not allow it so there's a conflict and your system locks/crashes.

What you need to do is get your BIOS updated. If your mainboard mfg does not have a new BIOS update to solve this problem you need to contact them and get them to make a revision. I sent an email to Tyan tech support with the link to the MS Knowledgebase article about this and asked them for a fix. They sent me an email a couple days later with a revision that has worked like a charm.

Hopefully this will fix your problem but if the CDROM issue persists maybe it's a corrupt CDROM driver or it could be failing.

 

[keta]

thank you