cpugeniusmv
Computer Genius
- Joined
- 14 Apr 2003
- Messages
- 485
who is the owner of /usr/home/glenn...and what are the permissions?
server1# cd /usr/home
server1# ls -la
total 6
drwxr-xr-x 3 root wheel 512 May 23 15:22 .
drwxr-xr-x 18 root wheel 512 May 23 17:26 ..
drwxr-xr-x 2 glenn glenn 512 May 23 15:22 glenn
server1#
I just clicked it in My Network Places under my workgroup. So I guess it's server1. But that shouldn't be an issue, since I can browse in server1, I can see the glenn_home dir, but when I click it, it gives all the problems I just stated.Geffy said:are you trying to connect to it through
\\Server1\glenn\
or
\\192.168.0.4\glenn\
I have no idea what version of Samba I have installed , but I can check that when I come home for lunch in an hour. It doesn't matter if I have to reach it by IP, since I plan to put all this in a cmd script anyway.Geffy said:Mine seems to have problems with the winbindd program so I cant use the \\squidge\geffy to access mine, I have to use the \\192.168.0.4\geffy to get at it
but there is a newer 3.0.4 version of samba out so I might try that and see if winbindd is fixed
i'd bet my left foot that DMA isn't enabled on your hard disk(s).Glaanieboy said:Another query:
I have just transferred my entire music folder to the BSD machine, and it did that at an avarage of 1.5-2 MB/s, but that seems rather slow on my 100mbit line. Is there anyway to increase the speeds?
server1# atacontrol mode 0 udma5 udma5
Master = UDMA100
Slave = ??? (<-- No slave is attached. CD-ROM and HD both use seperate IDE-channels)
you can doGlaanieboy said:the equivalent to hdparm in FreeBSD is atacontrol. I used this command to enable UDMA100 (the maximum the drive and board support):
Is this the correct command *looks at Geffy...*Code:server1# atacontrol mode 0 udma5 udma5 Master = UDMA100 Slave = ??? (<-- No slave is attached. CD-ROM and HD both use seperate IDE-channels)
Glaanieboy said:Wee! The IP thing works! And I have version 2.2.9 installed btw.
Thanks Geffy!
local master = yes
os level = 33
preferred master = yes
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
According to ifconfig, the card is running at 100mbit full duplex. I will try installing Samba-devel, but doesn't that have too many bugs, because it's a devel port?j79zlr said:Not sure Glaanie, maybe try the samba-devel port which installs version 3.04 [as of today]. I use it on both linux and BSD, my transfers are normal speed. I believe the 3.x version has had some performance increases.
Have you made sure that the other PC's card is working at 100full?