i have a problem at this situation...
If your RAID card only came with a driver CD then you’ll have to manually copy the relevant drivers to a floppy disk (for reasons that will become apparent shortly). Reboot off the Windows XP CD (you may have to make changes the system BIOS to enable this – refer to motherboard manual) and follow the self explanatory instructions to install XP on a separate partition (e.g. D:/Windows).When prompted, press F6 to install the RAID drivers from the floppy disk created above. "
------------------------------------------------------------------------
these are the things that i did, but in my case, after installing the RAID drivers, it says that it did not detect any hard disc or mass storage!!!!
but if i boot it up, it normally boots up using my 2000 Professional.
please help me....