Via 4.38

Discussion in 'General Hardware' started by zoyvod, Apr 17, 2002.

  1. zoyvod

    zoyvod Guest

    I have an AMD 761 chipset based motherboard but with a Via bus master IDE controller.Is it ok to use the 4.38 drivers?
  2. pmcartney

    pmcartney Guest

    I do, although I had to double check the busmaster driver it didn't update by itself, I had to do an autosearch for the newest driver which it installed but didn't implement on it's own.
  3. zoyvod

    zoyvod Guest

    so will I have a problem if install them?I think that these drivers search for the correct update and install only that.

    May the force be with us[​IMG] [/IMG]
  4. loppdawg69

    loppdawg69 Guest

    i did it and had no problems
  5. zoyvod

    zoyvod Guest

    Ok but lopp.. your motherboard has a Via chipset not an AMD.Mine's AMD 760 with VIA Bus master IDE controller
  6. MiseryQ

    MiseryQ Guest

    You have a combo board with bothe the AMD northbridge AND the AMD southbridge?!?

    Get the updates from your manufacturer...

    The Via's are made for Vias...

    As a side note I never expeirenced any benifet from using ANY 4in1's... I've done a lot of benchmarking and testing before and after, and after uninstalling again...
  7. Akash

    Akash OSNN Senior Addict

    ive built a machien with a similar chipset type board
    Abit KG7
    i installed the via 4-in-1
    no difference but nothig went bad either.