Quick Question.

Discussion in 'Windows Desktop Systems' started by Ranathis, Jul 13, 2008.

  1. Ranathis

    Ranathis OSNN One Post Wonder

    Messages:
    1
    I'm really not sure where to begin. I bought an EMachines T6534 way back when. Now here's kinda where the kicker comes in. I recently got a new case for my desktop and I switched it over, and being the dummy that I am I forgot to memorize where the small plugs for the front panel usb, and front panel headphone/microphone jacks plugged in. I'm really not too sure what Motherboard it is, so if someone could maybe take a look and maybe find a diagram or something it would be greatly appreciated! The only one of the three that I did manage to get working was the light haha.

    Thanks in advance.
    -Ranathis
     
  2. loaderbull

    loaderbull OSNN Junkie

    Messages:
    52
    Location:
    Midlands, UK
    Hi Ranathis,

    With a little digging around i found this, the home page for MSI (which is the make of the Motherboard in your E-Machines), on the right hand side are a few drop down menus where you can select your exact model etc;

    Your model is an MSI K8NGM2 as far as i can tell, as it states here;
    http://computershopper.com/roundups/200609_best_budget_pcs_3

    But here is the MSI site, have a look for manuals there;
    http://global.msi.com.tw/index.php?func=downloadindex

    It will be on there, just make sure you find the diagram that looks like yours. You'll need to know your CPU pin config, ie 754/939 or 940 pins.

    That should get you what you want though. Good luck.
     
    Shamus MacNoob likes this.
  3. LeeJend

    LeeJend Moderator

    Messages:
    5,291
    Location:
    Fort Worth, TX
    Look around the motherboard. The header connections are usually printed on it within a few inches of the header itself.