wigan_ukmale
OSNN Junior Addict
- Joined
- 8 Feb 2005
- Messages
- 45
I'm using US robotics courier 56K business modems connected to 1700 Cisco routers in a hub and spoke configuration and currently have them set up so that the spoke autodials the hub when the hub is powered off. This is done with the following commands:
ATS13.4=1 - Autodial on poweron/reset
ATS32=4 - Autodial when voice/data switch
What I need to achieve is for the spoke to autodial when the PSTN cable on the hub is disconnected. I have tried the following commands with no joy:
ATS69.1=1
ATS44=n
Answers on a postcard please.
ATS13.4=1 - Autodial on poweron/reset
ATS32=4 - Autodial when voice/data switch
What I need to achieve is for the spoke to autodial when the PSTN cable on the hub is disconnected. I have tried the following commands with no joy:
ATS69.1=1
ATS44=n
Answers on a postcard please.