IWill KK266R MOBO

Discussion in 'General Hardware' started by TrIpWiRe31337, Dec 15, 2001.

  1. I know it uses the VIA Chipset, but no sure on the version. If anyone has this board, or the KK266-R plz tell me how to install the VIA drivers, so I can use all the features that this kickass mobo supports.
     
  2. Bytes Back

    Bytes Back Ex Police Chief

    Messages:
    1,383
    Location:
    Kernow
    All you need for the VIA chipset are the via 4in1 drivers, almost certainly on the cd that came with your motherboard. This supports every chipset VIA does and has a setup program to make it nice and easy.

    If you have a board with raid on it you will need to install thse drivers seperatley through device manager.
     
  3. midiot

    midiot OSNN One Post Wonder

    Messages:
    9
    Location:
    Michigan
    There are updated VIA4in1 drivers available on the IWill website I believe
     
  4. LeeJend

    LeeJend Moderator

    Messages:
    5,291
    Location:
    Fort Worth, TX
    VIA changed the name from VIA 4 in 1 to VIA Hyperion.

    Go to the VIA or IWill website and download the latest version VIA Hyperion driver. Click on Open and then Install when it is done downloading and follow the menu instructions.

    Edit

    They made a liar out of me. IWILL still calls them 4 in 1.

    http://www.iwillusa.com/supports/drivers.asp?vID=76&SID=33&MID=26

    Two different versions on that page both support kk-266-r, use the 4.38.

    And for more than you really wanted to know you can go to:

    http://www.viaarena.com/default.aspx?PageID=2