em0 = intel (internet)
re0 = linksys (intranet)
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:0e:a6:f0:9e:0c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 164.168.1.1 netmask 0xffff0000 broadcast 164.168.255.255
ether 00:12:17:5a:ea:23
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
i could have sworn i pasted the output x wanted ealier this morn, but now the post dont look like its here
i'll add it again
$ top
last pid: 1665; load averages: 0.56, 0.14, 0.05 up 0+04:30:30 12:56:40
55 processes: 2 running, 53 sleeping
CPU states: 7.3% user, 0.0% nice, 18.6% system, 16.9% interrupt, 57.2% idle
Mem: 85M Active, 314M Inact, 154M Wired, 52K Cache, 112M Buf, 1449M Free
Swap: 4069M Total, 4069M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
1658 root 1 103 0 3556K 3264K RUN 0 0:09 31.05% glftpd
784 mysql 8 20 0 319M 56024K kserel 0 0:03 0.00% mysqld
786 root 1 8 0 18484K 11696K nanslp 0 0:01 0.00% httpd
872 www 1 4 0 19628K 13696K accept 0 0:00 0.00% httpd
871 www 1 4 0 21600K 15636K accept 0 0:00 0.00% httpd
875 www 1 4 0 19644K 13692K accept 0 0:00 0.00% httpd
873 www 1 4 0 19644K 13692K accept 0 0:00 0.00% httpd
891 www 1 4 0 19644K 13692K accept 0 0:00 0.00% httpd
889 www 1 4 0 19620K 13576K accept 0 0:00 0.00% httpd
874 www 1 4 0 19620K 13576K accept 0 0:00 0.00% httpd
890 www 1 4 0 19620K 13576K accept 0 0:00 0.00% httpd
806 root 1 96 0 3504K 2872K select 0 0:00 0.00% sendmail
675 root 1 96 0 5228K 3100K select 0 0:00 0.00% nmbd
816 root 1 8 0 1404K 1124K nanslp 0 0:00 0.00% cron
558 root 1 96 0 1376K 1028K select 0 0:00 0.00% syslogd
1657 darkness 1 96 0 2440K 1692K CPU0 0 0:00 0.00% top
systat -iostat 1 - doesnt show up the raid drive though - shows all the other drives