cpu speed

Discussion in 'General Hardware' started by BMWCHUBB, May 24, 2002.

  1. BMWCHUBB

    BMWCHUBB Guest

    Hello again,i have a Lite On AA280-via kt333 mainboard .
    The prob is,in the bios it shows cpu 1152?

    The cpu is a xp athlon 1800!!
    DOES ANYONE KNOW?if the board supports that speed?

    Or is there something i missed in the bios setup?
    jumper setting etc?

    Many thanks,hope to hear from you!!!
     
  2. Vsync

    Vsync Guest

    You need to set your FBS to 133MHz in the bios.

    make sure your mobo is set to jumper-free mode
     
  3. Jz1397-5

    Jz1397-5 XP Bad Ass

    Messages:
    1,278
    Location:
    Philadelphia PA
    Beat me to it, but yea same thing.
     
  4. BMWCHUBB

    BMWCHUBB Guest

    fsb




    It says in the bios that the current FSB is 100MHz.
    Carnt find the option to change it,or i,ve missed
    something?help
    :rolleyes:
     
  5. xontroulis

    xontroulis Guest

    You have to change the CPU speed setting from AUTO to MANUAL and then set the FSB speed by pressing the - or + keys, or with some other BIOS the PageUp and PageDown.

    Also the 1800 number of your processor does not relate to MHz. according to AMD the XP1800 operates at 1.533GHz

    therefore set the FSB at 133MHz and the CPU clock multiplier to 11.5
    :rolleyes:
     
  6. BMWCHUBB

    BMWCHUBB Guest


    The fsb is not highlighted in the bios,there is no clock multiplier
    THERE IS 3 JUMPER SETTINGS ON THE MOBO.


    1.clear cymos
    2.bios protect ,disable that!!
    3.cpu frequency,that is set at 133mhz??:rolleyes: