Bio setup

Discussion in 'General Hardware' started by pepper, Nov 21, 2002.

  1. pepper

    pepper Guest

    Can anyone explain the Bio setting to me
    I am having problem at the "Frequency/Voltage Control" page

    CPU Clock ratio ~~ 10X to 24X
    CPU Host Clock Control ~~ Enabled/Disabled
    CPU Host Freq(Mhz) ~~ 100 to 355
    PCI/APG Divider ~~ Disabled/ PLL/16/20/24/32/40
    Host/Dram Clock ratio ~~ Auto/2.0/2.66
    DIMM OverVoltage Control ~~ Normal/+0.1V/+0.2V/+0.3V
    AGP OverVoltage Control ~~ Normal/+0.1V/+0.2V/+0.3V
    CPU Voltage Control ~~Normal/1.775V/1.800V/1.825V/1.850V
    Normal CPU Vcore ~~ 1.750V


    What is the best choice ?
    Gigabyte GA_81RXP/1.7P4 Celeron/512ddr266/MIS G4Ti4200/Maxtor 80G

    Thanks
     
  2. GoNz0

    GoNz0 NTFS Stoner

    Messages:
    2,781
    Location:
    the year 2525
  3. jumpy

    jumpy Guest

    CPU Clock ratio ~~ 10X to 24X --- Multiplier is locked anyway on your chip, so set it to anything you feel like :)

    All below settings shouldnt be left on default unless you are overclocking. Are you going to be?

    CPU Host Clock Control ~~ Enabled/Disabled
    CPU Host Freq(Mhz) ~~ 100 to 355
    PCI/APG Divider ~~ Disabled/ PLL/16/20/24/32/40
    Host/Dram Clock ratio ~~ Auto/2.0/2.66
    DIMM OverVoltage Control ~~ Normal/+0.1V/+0.2V/+0.3V
    AGP OverVoltage Control ~~ Normal/+0.1V/+0.2V/+0.3V
    CPU Voltage Control ~~Normal/1.775V/1.800V/1.825V/1.850V
    Normal CPU Vcore ~~ 1.750V