R
RobbieSan
Guest
here's an interesting one.. I hope someone out there has run into something similar so they can give me some advice..
BIOS V1.10
this mainboard can be configured to run at 100MHz FSB or 133MHz (x2 = 266).. when I set the two jumpers as described in the manual my machine will not post at all.. trying any of the other three jumper configs it will not post.. set it back to the 100MHz config and no prob..
Tyan tech support figures I have A) set jumpers incorrectly, or B) my power supply is too weak to power the machine with my current goodies and 266MHZ FSB
I disconnected my 2 CDROMs and 2nd HD and tried it with the other jumper configs but still no go..
Although it is not pointed out in the manual, am I supposed to change the CPU clocking frequency or something?
I am wondering if this portion of the board is no good.. but I wouldn't be surprised if it's some little setting I am missing...
any help is appreciated....
BIOS V1.10
this mainboard can be configured to run at 100MHz FSB or 133MHz (x2 = 266).. when I set the two jumpers as described in the manual my machine will not post at all.. trying any of the other three jumper configs it will not post.. set it back to the 100MHz config and no prob..
Tyan tech support figures I have A) set jumpers incorrectly, or B) my power supply is too weak to power the machine with my current goodies and 266MHZ FSB
I disconnected my 2 CDROMs and 2nd HD and tried it with the other jumper configs but still no go..
Although it is not pointed out in the manual, am I supposed to change the CPU clocking frequency or something?
I am wondering if this portion of the board is no good.. but I wouldn't be surprised if it's some little setting I am missing...
any help is appreciated....