Toshiba Tecra M2 wont boot, M/B stuffed?

Skunk141

OSNN Addict
Joined
6 Jan 2004
Messages
98
Hi,

I have quite a bit of knowledge with computers, building them loading xp etc etc but I have never seen this before, this is the error I am getting.

TRAP 0000000E ================PAGE FAULT=====================

** At linear address 00000000

Then a lot of text, let me know if you want me to type it all out...

This happens even with the extra memory removed, tried swapping the H/D for a brand new one, the error occurs as soon as the H/D or CD try to boot XP / XP Setup

Any clues chaps I'm at the point where I'm thinking the M/B is stuffed although I can get in to BIOS to set defaults???

Cheers for any help :)
 
im guessing you have the bios set to boot from cd ? doubt a bad cable could cause this but you never know, if neither the hdd or cd drive are acting up in leaning towards a cable or board fault, maybe the ide port on the board is acting up
 

Members online

No members online now.

Latest profile posts

Also Hi EP and people. I found this place again while looking through a oooollllllldddd backup. I have filled over 10TB and was looking at my collection of antiques. Any bids on the 500Mhz Win 95 fix?
Any of the SP crew still out there?
Xie wrote on Electronic Punk's profile.
Impressed you have kept this alive this long EP! So many sites have come and gone. :(

Just did some crude math and I apparently joined almost 18yrs ago, how is that possible???
hello peeps... is been some time since i last came here.
Electronic Punk wrote on Sazar's profile.
Rest in peace my friend, been trying to find you and finally did in the worst way imaginable.

Forum statistics

Threads
62,015
Messages
673,494
Members
5,621
Latest member
naeemsafi
Back