Question about RAM

[Caligo]

The RAM I am using is labeled as being CAS Latency 2(Corsair PC-133 CAS-2). However, when I use the "auto" speed detection mode in my bios it uses CAS-3. I would set the speed manually but there are 2 other settings that I don't know what value to set for. One is for "RAS to CAS Delay" and the other is for "RAS Precharge". What should I set for these? My motherboard is an Asus CUBX in case that matters at all. Thanks.

 

[Qumahlin]

If you have good Cas 2 ram set everything to the lowest settings for each category and there should be no problem. do a benchmark before and after to see if there is much of an improvement so you know if it's even something to bother with.

 

[Caligo]

Thanks for the quick reply. There is one more setting I forgot about. What should I set DRAM Idle Timer to? By default it is 10. Thanks.