Re: i need help any1 on?
Resetting the bios will change a SATA setting and you have to change it back.
Look in the bios under Drives then SATA Operation.
You should have the following but maybe a bit different:
RAID Autodetect/ AHCI (the default setting) – RAID if the drives are signed, otherwise AHCI
RAID Autodetect/ ATA – RAID if the drives are signed, otherwise ATA
RAID On – SATA is configured for RAID on every boot.
Combination – combination mode, which offers compatibility with versions of the operating system that do not support SATA drives.
It will probably be set to the default and you need to change it to:
RAID Autodetect/ ATA – RAID if the drives are signed, otherwise ATA
Then drive should be seen by XP setup.