Modem Autodial On Reconnection

Discussion in 'General Hardware' started by wigan_ukmale, Aug 16, 2005.

  1. wigan_ukmale

    wigan_ukmale OSNN Junior Addict

    St Helens
    I'm using US robotics courier 56K business modems connected to 1700 Cisco routers in a hub and spoke configuration and currently have them set up so that the spoke autodials the hub when the hub is powered off. This is done with the following commands:

    ATS13.4=1 - Autodial on poweron/reset
    ATS32=4 - Autodial when voice/data switch

    What I need to achieve is for the spoke to autodial when the PSTN cable on the hub is disconnected. I have tried the following commands with no joy:


    Answers on a postcard please.