i have searched the net about a million times to find mods for this board but still result is zero. its bios even have very few customizable options. however, intel claims this is the best motherboard for the P4s so i surely will stick with it.
Tinker, is your 1.8ghz p4 a northwood? ie 512k L2 cache.
If it is, you might be able to run it at 533fsb (2.4ghz). You can do a pin mod to make your p4 do it here , and it might need a little extra voltage(see here
Another alternative is softFSB or cpuFSB if your cpu can't do 133fsb.
See this thread.
Its your cpu that is a northwood, not the board. Yes, if your cpu has 512k cache, it is a northwood p4 which is a much better overclocker.
Take heed given to the warnings given though, overclocking can damage your components. A lot of heat is generated, so get some extra cooling for your cpu and some case fans.
Also Hi EP and people. I found this place again while looking through a oooollllllldddd backup. I have filled over 10TB and was looking at my collection of antiques. Any bids on the 500Mhz Win 95 fix?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.