Host controllers????

Z

ZipTriX

Guest
SiSoft Sandra results are:

Warning W2533: Disabled host controllers are present. Check BIOS settings.

What are they are and how do I enable them?

Abit KT7A-RAID

System report attached
 
Z

ZipTriX

Guest
Originally posted by Lonman
Do you have any hard drives attached to your Raid?
Yes, but not in a RAID configuration. Only as ATA100.
 

Lonman

Bleh!
Joined
2 Dec 2001
Messages
2,642
I'm really not sure. Do you have USB support enabled? The only real help i think i can offer is i ran Sandra's (create a report) to see what it came up with on mine. Here's my main board (Abit KT7-Raid) section:

<<< Mainboard Information >>>
------------------------------------------------------------------------------------------------

< Entire System >
Manufacturer: VIA Technologies, Inc.
Model: VT8363
Unique ID: FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

< System Mainboard >
Manufacturer: <http://www.abit.com.tw>
MP Support: No
Model: 8363-686A(KT7[A][-RAID],KT7E)
Version: v1.0 ~ v1.2

< Extended Mainboard Data >
Manufacturer: Abit
Model: GREEN AGP/PCI/ISA SYSTEM
Serial Number: 11/07/2001-8363-686A-6A6LMA19C-64
Chipset: VIA KT133 Chipset

< On-board Devices >
Unknown: Unknown
Unknown: Unknown

< System Memory Controller >
Location: Mainboard
Error Correction Capability: None
Number of Memory Slots: 4
Maximum Installable Memory: 2GB
Bank0/1 - BANK_0: NoneNoneNoneNone þÿÿÿÿÿ !  DIMM 1024MB

< System Chipset >
Model: Abit Computer Corp KT7A Mainboard System Controller
Bus(es): ISA AGP PCI USB SMBus/i2c
Front Side Bus Speed: 2x 100MHz (200MHz data rate)

< Logical/Chipset Memory Banks >
Bank 0 Setting: 512MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CL
Bank 2 Setting: 512MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CL
Bank 4 Setting: 512MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CL
Bank Interleave: 4-way
Bus Speed: 1x 100MHz (100MHz data rate)
Bus Multiplier: 1x
Power Down Mode: No
Fixed Hole Present: No

< Memory Modules >
Memory Module 1: 512MB 16x(64Mx4) SDRAM PC133U-333-542 (CL3 upto
133MHz)
Memory Module 2: 512MB 16x(64Mx4) SDRAM PC133U-333-542 (CL3 upto
133MHz)
Memory Module 3: 512MB 16x(64Mx4) SDRAM PC133U-333-542 (CL3 upto
133MHz)

< Environment Monitor 1 >
Model: VIA 686PM ISA
Version: 10.00
Mainboard Specific Support: Yes

< Temperature Sensor(s) >
Board Temperature: 1.0°C / 33.8°F
CPU Temperature: 1.0°C / 33.8°F
Power / Aux Temperature: 1.0°C / 33.8°F

< Cooling Device(s) >
Auto Fan Speed Control: No
Chassis Fan Speed: 1350000rpm
CPU Fan Speed: 1350000rpm
Power / Aux Fan Speed: 1350000rpm

< Voltage Sensor(s) >
CPU Core Voltage: 0.02V
Aux Voltage: 0.02V
+3.3V Voltage: 0.02V
+5V Voltage: 0.03V
+12V Voltage: 0.06V
-12V Voltage: -0.06V
-5V Voltage: -0.02V

< AGP Bus >
Version: 2.00
Bus Speed: 66MHz
Current Data Transfer Rate: 4x (264MHz)
Side Band Enabled: Yes
Fast-Writes Enabled: No
Aperture Size: 32MB

< PCI Bus(es) >
Version: 2.10
No Buses: 1
No Bridges: 1
Bus Speed: 33MHz
Speed Multiplier: 1/3x

< LPC Hub Controller 1 >
Model: VIA Technologies Inc VT82C686/A/B PCI to ISA Bridge
ACPI PM Support: Yes
Random Number Generator Support: No
Speed Multiplier: 1/4x
Bus Speed: 8MHz
DMA Multiplier: 1/2x
DMA Speed: 4MHz

< USB Controller 1 >
Model: VIA Technologies Inc VT83C572,VT82C586/A/B,VT82C596B,
VT82C686A USB Controller
Version: 1.10
UHCI Interface: Yes
Channels: 2
Bus Speed: 48MHz
Legacy Emulation Enabled: No

< USB Controller 2 >
Model: VIA Technologies Inc VT83C572,VT82C586/A/B,VT82C596B,
VT82C686A USB Controller
Version: 1.10
UHCI Interface: Yes
Channels: 2
Bus Speed: 48MHz
Legacy Emulation Enabled: No

< System SMBus Controller 1 >
Model: Intel PIIX4 SMBus / compatible
Bus Speed: 16kHz

< Expansion Slot(s) >
ISA: ISA 16-bit 5V FullLength
PCI (11h): PCI 32-bit 5V FullLength Available
PCI (Fh): PCI 32-bit 5V FullLength Available
PCI (Dh): PCI 32-bit 5V FullLength InUse (YAMAHA Corp DS-XG PCI
Audio CODEC)
PCI (Bh): PCI 32-bit 5V FullLength InUse (Realtek Semiconductor
RT8139 (A/B/C/8130) Fast Ethernet Adapter)
PCI (8h): PCI 32-bit 5V FullLength Available
PCI (4Eh): PCI 32-bit 5V FullLength Available
AGP (8h): AGP 32-bit 5V FullLength InUse (ATI Technologies All-
in-Wonder Radeon AGP)

< Port Connector(s) >
PRIMARY IDE: None - ATA / None
SECONDARY IDE: None - ATA / None
FDD: 8251 FIFO Compatible - Floppy / None
COM1: Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-
9 pin male
COM2: Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-
9 pin male
LPT1: Parallel Port ECP/EPP - DB25 pin female / DB25 pin
female
Keyboard: Keyboard Port - None / PS/2
PS/2 Mouse - Detected: Mouse Port - PS/2 / PS/2
USB: USB - None / None

< Performance Tips >
Notice N224: SMBIOS/DMI information may be inaccurate.
Warning W2528: System monitor device implementation is known to vary.
Tip T2: For more information about tips, press F1 and scroll
to the Tips section.

I have NO idea if this will help you out or not. Maybe you'll see something that gives you an idea. Good luck. Oh, if everything is working ok, i wouldn't lose sleep over it.
 
Z

ZipTriX

Guest
what version fo SiSoft Sandra are you using? If possible could you send it to me?

Not going to lose sleep over it, just want to have my pc setup to the best it can be and not crash after 4 days of running.
 
Z

ZipTriX

Guest
According to the About of mine, it says SiSoft Sandra Standard version 2001.5.8.11
 

Members online

No members online now.

Latest profile posts

Electronic Punk wrote on Sazar's profile.
Rest in peace my friend, been trying to find you and finally did in the worst way imaginable.
Terrahertz wrote on Electronic Punk's profile.
Yo fellas!
Electronic Punk wrote on Sazar's profile.
Where are you buddy?
Perris Calderon wrote on Electronic Punk's profile.
Hey EP! All good with me, applying for Microsoft MVP right now, should have done this a while ago.

Notifications don't work, I only found your response by coming back to hunt up some threads, if you want, give me your email address so we can keep in touch easier!
Perris Calderon wrote on Electronic Punk's profile.
EP, glad to see you come back and tidy up...did want to ask a one day favor, I want to enhance my resume , was hoping you could make me administrator for a day, if so, take me right off since I won't be here to do anything, and don't know the slightest about the board, but it would be nice putting "served administrator osnn", if can do, THANKS

Been running around Quora lately, luv it there!

Forum statistics

Threads
61,997
Messages
673,401
Members
5,586
Latest member
PseudoKiller