Kr0m
OSNN Veteran Addict
- Joined
- 4 Dec 2001
- Messages
- 1,392
I posted this over at the OCZ forums but I'll post here as well in hopes of a quicker response time hehe....
I just upgraded my motherboard, cpu, ram (AMD 4400+, PC3200 ddr400 to Intel e8400, PC8500 DDR21066) and I noticed that my values don't seem to read 'as advertised'. I've messed around a bit in the bios with different things (after doing hours of research) but I'm still not sure if I'm setting values correctly. I'm not looking to overclock it a huge amount but I'd at least like to get the optimum values for the CPU and RAM with the best settings possible.
I've managed to change a few settings successfully but the others I'm not so sure about changing or whether not anything else needs to be changed at all.
The following screenshots should help:
1. A screenshot of memtest (no errors)
2. CPU Values from CPU-Z (If I understand correctly... Core Voltage, Core Speed, Multiplier fluctuate depending on loads)
3. Motherboard Info from CPU-Z
4. Memory Info from CPU-Z (Are the FSB : DRAM values ok?)
5. SPD Info from CPU-Z
6. BIOS Screenshot - AI Tweaker Part I
7. BIOS Screenshot - AI Tweaker Part II
8. BIOS Screenshot - AI Tweaker Part III
9. BIOS Screenshot - Advanced
Thanks for your help!
I just upgraded my motherboard, cpu, ram (AMD 4400+, PC3200 ddr400 to Intel e8400, PC8500 DDR21066) and I noticed that my values don't seem to read 'as advertised'. I've messed around a bit in the bios with different things (after doing hours of research) but I'm still not sure if I'm setting values correctly. I'm not looking to overclock it a huge amount but I'd at least like to get the optimum values for the CPU and RAM with the best settings possible.
I've managed to change a few settings successfully but the others I'm not so sure about changing or whether not anything else needs to be changed at all.
The following screenshots should help:
1. A screenshot of memtest (no errors)
2. CPU Values from CPU-Z (If I understand correctly... Core Voltage, Core Speed, Multiplier fluctuate depending on loads)
3. Motherboard Info from CPU-Z
4. Memory Info from CPU-Z (Are the FSB : DRAM values ok?)
5. SPD Info from CPU-Z
6. BIOS Screenshot - AI Tweaker Part I
7. BIOS Screenshot - AI Tweaker Part II
8. BIOS Screenshot - AI Tweaker Part III
9. BIOS Screenshot - Advanced
Thanks for your help!