L
ludwik
Guest
Any ideas anyone?
Hi, I have here a problem : here are the details.
Firstly, after a hard reboot, with power temoved from the case, the computer only boots after second attempt. After first attempt pc speaker beeps for 2 seconds, no VGA out, no HD activity other then power up.
secondly
I've run bootvia already and the results are in the attached files. As you can see there as some 150 seconds of 0 activity, the system is just idlea while the winXP logo is shown with the coloured bar moving across the screen.
System set up:
Athlon 1.2Ghz
KT7 (non raid) Abit mother board.
pure scsi harddisk config, 32Gb IBM hard disks,
Adaptec SCSI Card 19160
Geforce2 64mb ddr
512mb sd ram (non ddr)
I've tried placing the scsi card in different slots to solve first problem, I've updated XP fully (Professional Version).
Any ideas on both issues?
Thank you for your time
Do I need to give more info? please ask if so.
Ludwik
__________________
a quick contradiction:
<<< This is a lie >>>
Hi, I have here a problem : here are the details.
Firstly, after a hard reboot, with power temoved from the case, the computer only boots after second attempt. After first attempt pc speaker beeps for 2 seconds, no VGA out, no HD activity other then power up.
secondly
I've run bootvia already and the results are in the attached files. As you can see there as some 150 seconds of 0 activity, the system is just idlea while the winXP logo is shown with the coloured bar moving across the screen.
System set up:
Athlon 1.2Ghz
KT7 (non raid) Abit mother board.
pure scsi harddisk config, 32Gb IBM hard disks,
Adaptec SCSI Card 19160
Geforce2 64mb ddr
512mb sd ram (non ddr)
I've tried placing the scsi card in different slots to solve first problem, I've updated XP fully (Professional Version).
Any ideas on both issues?
Thank you for your time
Do I need to give more info? please ask if so.
Ludwik
__________________
a quick contradiction:
<<< This is a lie >>>