Reply
Old February 19th, 2002 Top | #1
smeghead
 
smeghead's Avatar
Unregistered
Posts: n/a

Default diamond 56e pro modem drivers

I have a diamond 56e pro modem i have installed correct drivers but every time i turn off my modem and turn it back on it asks me to reinstall drivers. Also most of the tyime it dials the number and stops when on a different computer the same number works. can anyone help
  Reply With Quote
Old February 19th, 2002 Top | #2

OSNN Folding Team  
Khayman's Avatar
I'm sorry Hal...
Joined: January 2002
Location: England
Posts: 5,514
Reputation: 1210
Power: 194

Default

i found this one their site, its not dor xp but it may help


NOTE: This assumes that the modem is jumpered for a plug & play configuration, which is the default factory setting.

1. Determine whether Windows in improperly configuring the modem. To ensure and correct for this, do the following:

A. Open the Device Manager, click Start/Settings/Control Panel/System/Device Manager.
B. Remove any Supra modems found under 'Modems' and/or 'Other Devices'.
C. Reboot the system

When the system reboots, Windows should find the modem and load the appropriate drivers. Insert the driver disk if requested. In most cases, this should correct the situation.

2. If the modem is not found when the system reboots or there was nothing listed in the Device Manager, it will be necessary to check the system registry. To do this, do the following:

Note: It is recommended that you make a backup of your Registry before proceeding.

A. Click Start/Run.
B. Enter REGEDIT and click OK.
C. In the Registry Editory, locate the following registry key:

HKEY_LOCAL_MACHINE\Enum\ISAPNP

D. Click the "+" in front of this key to expose any sublistings.
E. On the left window below the above key, there should be a listing for a "SUP####" (without the quotes). Its presence would indicate that Windows has detected the modem in the system.
F. Right-click on the SUP#### key and select Delete.
G. Confirm the removal and close all windows.
H. Restart the computer.

Windows should then detect the modem on reboot. If the modem is still not detected or there was no listing of an SUP#### in the registry, you should try reseating the modem into another slot in the computer.


also check this



http://www.diamondmm.com/default.asp...ff&item=modems

"*I'm* on the server side. I don't know what side you're on"
Khayman is offline   Reply With Quote
Old February 19th, 2002 Top | #3
smeghead
 
smeghead's Avatar
Unregistered
Posts: n/a

Default Modem

I will give that a go tonight but it is an external modem not internal
  Reply With Quote

Reply

Bookmarks

Thread Tools

Posting Rules

Similar Threads
Thread Thread Starter Forum Replies Last Post
Got Modem Drivers... Now What??? erbinone Windows Desktop Systems 8 October 18th, 2002 9:42pm
Diamond MM Viper 2 Z200 Drivers Goatman Windows Desktop Systems 3 October 11th, 2002 8:10am
PCI Modem Drivers Phil J01 Windows Desktop Systems 7 July 18th, 2002 8:30pm
Diamond SupraMax USB drivers? BOEING Windows Desktop Systems 1 January 21st, 2002 2:52am
Diamond Viper 2 Xp Drivers? snowcab Windows Desktop Systems 1 January 3rd, 2002 1:15am