MaDCeLL

hi,

i´m taking wild guesses on this one.. cauze up to now... noone was able to identify the prob.

after regular 24h diconnection my DSL Line reconnects, BUT the "old" connection remains as zombie, like:

DSL
ip 0.0.0.0
subnet 0.0.0.0
gateway 123.123.123.123

and then a new DSL connection is added with the exact same name

DSL
ip 12.23.12.12
subnet 255.255.255.255
gateway 12.23.12.250

problem is ... the PC tries to route all internet traffic thru the "old" connection.. which is o´c not much of a success ;-)

i tried a "route delete * IF 5" (5 is the "zombie") but it wont help

i tried native winxp wanminiport and pppoe 0.96 ... no change.

the workaround: reboot :-) ... but thats not really an acceptable solution ...

.. any suggestions ?

meseriashu

Hi,

I have the same prob. i did not solve it... i was looking in a lot of forums but nothing!

anybody has something to improve that?

Qumahlin

have you tried running the command prompt and doing a ipconfig /release and then a ipconfig /renew

And if that failed did you check the arp table and see if the connection is listed there for the zombie and if if is delete it?

meseriashu

C:\>ipconfig

Windows IP Configuration


Ethernet adapter LAN:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

PPP adapter T-DSL:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : 192.168.0.2

C:\>
C:\>ipconfig /renew

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\>ipconfig /renew PPP*

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\>ipconfig /release

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\>ipconfig /release PPP*

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\>arp -a
No ARP Entries Found


AFTER ESTABLISH THE CONNECTION AGAIN


C:\>ipconfig

Windows IP Configuration


Ethernet adapter LAN:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

PPP adapter T-DSL:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . : 192.168.0.2

PPP adapter T-DSL:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 80.132.137.25
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 80.132.137.25

C:\>
C:\>ipconfig /renew

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\>ipconfig /release

Windows IP Configuration

The operation failed as no adapter is in the state permissible for
this operation.

C:\>arp -a
No ARP Entries Found

C:\>