Creative Inspire 6.1 problem PLZ HELP

May 21st, 2003

i'm having problem with my front center speaker
i'm using Sound Blaster Audigy 2 Platinum
i enable the CMSS 2 3D on
then the front center speaker speaking low volume

if i turn CMSS2 on with "5.1 /6.1" set on the subwoofer
then both CENTER speakers won't work

if i set "5.1 upmix 6.1" on the subwoofer with CMSS2 then only front center speaking low volume.

i also installed the lastest driver

how come i make all speakers are balance
is someone here can HELP??

May 21st, 2003

Check the cables again in the soundcard and make everything setup default by using "C:\Program Files\Creative\SBAudigy2\Program\RDefault.exe". or whereever u install your file too and change CMSS3D -> CMSS not CMSS2 option. My guess is the way you connected the cables that's the problem I did that one'c and I counld hear anything in center and back.

P.S. I have 5.1 never ever saw the 6.1 in front of my eyes but I heard about it saw it in a magazine and on internet.

May 22nd, 2003

Hey i have the exact same speakers and soundcard.
The previous drivers ****ed up my cable settings.
But the new ones fixed it. So what i did was just changed
my cabling to the ones i had before i even installed drivers (the correct manual way) and damn everything worked.
The problem i was having though, was that in mp3s only
3 channels would work. But in movies everything. So now with
the latest drivers and all channels i'm very happy.

I have the europe edition though.. don't think it matters,

6700.

Yngwie II

May 23rd, 2003

Originally posted by Yngwie_II
Hey i have the exact same speakers and soundcard.
The previous drivers ****ed up my cable settings.
But the new ones fixed it. So what i did was just changed
my cabling to the ones i had before i even installed drivers (the correct manual way) and damn everything worked.
The problem i was having though, was that in mp3s only
3 channels would work. But in movies everything. So now with
the latest drivers and all channels i'm very happy.

I have the europe edition though.. don't think it matters,

6700.

Yngwie II

good 4 u man

May 24th, 2003

check the wires and calibrate your speakers
also good tip dont get creative stuff they are ****e and they deny it

May 21st, 2003	Top \| #1
SlaveZero Unregistered Posts: n/a	Creative Inspire 6.1 problem PLZ HELP i'm having problem with my front center speaker i'm using Sound Blaster Audigy 2 Platinum i enable the CMSS 2 3D on then the front center speaker speaking low volume if i turn CMSS2 on with "5.1 /6.1" set on the subwoofer then both CENTER speakers won't work if i set "5.1 upmix 6.1" on the subwoofer with CMSS2 then only front center speaking low volume. i also installed the lastest driver how come i make all speakers are balance is someone here can HELP??

May 23rd, 2003	Top \| #4
SlaveZero Unregistered Posts: n/a	Originally posted by Yngwie_II Hey i have the exact same speakers and soundcard. The previous drivers ****ed up my cable settings. But the new ones fixed it. So what i did was just changed my cabling to the ones i had before i even installed drivers (the correct manual way) and damn everything worked. The problem i was having though, was that in mp3s only 3 channels would work. But in movies everything. So now with the latest drivers and all channels i'm very happy. I have the europe edition though.. don't think it matters, 6700. Yngwie II good 4 u man

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Creative Inspire T7700 & T9700	LocKStocK	General Hardware	1	March 28th, 2005 2:00pm
Creative Inspire 5.1 5200	meisme	General Hardware	12	September 26th, 2003 3:00pm
Creative Inspire 6700 Speakers	indyjones	General Hardware	6	September 11th, 2003 9:04am
Creative Inspire 5.1 5200 question....	gballard	General Hardware	2	March 18th, 2003 12:08pm
Creative Inspire 4.1 4400	drahzar	Windows Desktop Systems	3	September 28th, 2002 1:24am

Latest News Posts

Latest Forum Posts

Latest Member Blogs

May 21st, 2003	Top \| #2
neo Unregistered Posts: n/a	Check the cables again in the soundcard and make everything setup default by using "C:\Program Files\Creative\SBAudigy2\Program\RDefault.exe". or whereever u install your file too and change CMSS3D -> CMSS not CMSS2 option. My guess is the way you connected the cables that's the problem I did that one'c and I counld hear anything in center and back. P.S. I have 5.1 never ever saw the 6.1 in front of my eyes but I heard about it saw it in a magazine and on internet.

May 22nd, 2003	Top \| #3
Yngwie_II Unregistered Posts: n/a	Hey i have the exact same speakers and soundcard. The previous drivers ****ed up my cable settings. But the new ones fixed it. So what i did was just changed my cabling to the ones i had before i even installed drivers (the correct manual way) and damn everything worked. The problem i was having though, was that in mp3s only 3 channels would work. But in movies everything. So now with the latest drivers and all channels i'm very happy. I have the europe edition though.. don't think it matters, 6700. Yngwie II

May 24th, 2003	Top \| #5
XP Abuser Unregistered Posts: n/a	check the wires and calibrate your speakers also good tip dont get creative stuff they are ****e and they deny it