VIBERATE THEN RING or VIBE AND RING

Discussion in 'Portable Devices & Gadgets' started by brad96stanggt, Jun 7, 2006.

  1. brad96stanggt

    brad96stanggt OSNN Junior Addict

    Messages:
    14
    I really would like a vibrate and ring feature and I have read that you can hack it in the .04 hardware.....can anyone gimme a write up on how to do it!?? I need this feature!!!!!! Thanks ahead of time!
     
  2. walter9258

    walter9258 Verizon Hater

    Messages:
    37
    Location:
    southern illinois
    edit seem 2742 length 90. In offset 7b, you need to turn off bit 3 and turn on bit 4. if you don't know how to edit a seem, there are many threads explaining it on here if you do a little searching. you can also find many other seem edits with the search function on this forum.
     
  3. Letifo

    Letifo OSNN One Post Wonder

    Messages:
    2
    does this work for v3m? Also, just as relevant, will this work on .05? Also, is this vibe and ring or vibe then ring?
     
  4. walter9258

    walter9258 Verizon Hater

    Messages:
    37
    Location:
    southern illinois
    I'm assuming this will work on the v3m since everything I've read shows it uses the same seems as the v3c. v .05 on the V3m is also just an updated version of the v3c's .04 fw from what I've seen, so most seem edits already documented for the v3c should work. and this is for vibe THEN ring. so far no one has found a way to make the phone vibe AND ring at the same time.
     
  5. Letifo

    Letifo OSNN One Post Wonder

    Messages:
    2
    i appreciate this post, very to the point and concise. (you're also helping in the other thread)

    Since you're knowledgeable can you hit me with another couple quick answers. In order to seem edit, I don't need to change the version number, correct? (i.e. i can seem edit .05 and make it vibe then ring, and also seem edit it to allow "set as ringtone" for mp3s etc. or whatever seem edits are out there). Other question, what is PST and P2k commander? Even though i can't sync up my phone with WMP10 (or get bitpim to do anything, though this might be a result of no seem editing currently) do you think that p2k and pst would allow me to seem edit it since it will charge (it also shows up as a modem in my hardware section)? I think i'm going to try it on my gf's computer because mine is acting funny in general anyway, i think I need a reformat but that's a different discussion.
     
  6. walter9258

    walter9258 Verizon Hater

    Messages:
    37
    Location:
    southern illinois
    motorola pst is the programming software used to program motorola phones... its actually not easy obtained by the general public, but you can probably find it with a google search or perhaps via p2p software like limewire or something similar. and p2k commander is used in conjunction with pst to add and delete files from the phone's file system, and I think can be downloaded from the motomodders website under the downloads section. to do the actual seem edits, you'll need p2k seem, which can be found on the motomodders site as well. and yes, you can seem edit without changing firmware versions, since the v3c and v3m have BASICALLY similar filesystems, except for the transflash card.