Problem with Geforce + D-led Power

Discussion in 'Graphics Cards' started by Empire, May 29, 2002.

  1. Empire

    Empire Guest

    :( I have a problem!

    when i start the Pc it is going but it will stop when it will search for the Agp card d- led will say that there is an error with the Vga card
    but when i enter the power button several times then it will resume and the Agp card works fine
    this is a Geforce 4 and with a Geforce 2 the same probs.
    maybee someone can help???
     
  2. Zedric

    Zedric NTFS Guru Folding Team

    Messages:
    4,006
    Location:
    Sweden
    Broken MB? Sounds like it's the funny semi-broken kind. You didn't overclock anything did you?
     
  3. Empire

    Empire Guest

    no didn't overclock!
    always used a Tnt 2 card with no problems but when i bought a Geforce 4 weeks ago this problem appeared
     
  4. stuy_b

    stuy_b Guest

    Open the PC case and double check the AGP card is sat FIRMLY in the AGP slot.

    Go into your motherboard BIOS settings, and check the AGP transfer mode is set to x2 or higher. Also set the apature size to 64mb or higher (if u have that option, not all boards do).

    check the motherboard BIOS has IRQ11 assigned to the AGP port.

    Check you PSU(power supply unit), a minimum of 250w is wot you should have, bigger is better obviously.

    Hope this gives you some help.
     
  5. Empire

    Empire Guest

    Re: Re: Problem with Geforce + D-led Power

    all above is already set

    but thanks anyway!