Creative Inspire 6.1 problem PLZ HELP

Discussion in 'Windows Desktop Systems' started by SlaveZero, May 21, 2003.

  1. SlaveZero

    SlaveZero Guest

    i'm having problem with my front center speaker
    i'm using Sound Blaster Audigy 2 Platinum
    i enable the CMSS 2 3D on
    then the front center speaker speaking low volume :rolleyes:

    if i turn CMSS2 on with "5.1 /6.1" set on the subwoofer
    then both CENTER speakers won't work

    if i set "5.1 upmix 6.1" on the subwoofer with CMSS2 then only front center speaking low volume.

    i also installed the lastest driver

    how come i make all speakers are balance
    is someone here can HELP??
  2. neo

    neo Guest

    Check the cables again in the soundcard and make everything setup default by using "C:\Program Files\Creative\SBAudigy2\Program\RDefault.exe". or whereever u install your file too and change CMSS3D -> CMSS not CMSS2 option. My guess is the way you connected the cables that's the problem I did that one'c and I counld hear anything in center and back.

    P.S. I have 5.1 never ever saw the 6.1 in front of my eyes but I heard about it saw it in a magazine and on internet.
  3. Yngwie_II

    Yngwie_II Guest

    Hey i have the exact same speakers and soundcard.
    The previous drivers ****ed up my cable settings.
    But the new ones fixed it. So what i did was just changed
    my cabling to the ones i had before i even installed drivers (the correct manual way) and damn everything worked.
    The problem i was having though, was that in mp3s only
    3 channels would work. But in movies everything. So now with
    the latest drivers and all channels i'm very happy.

    I have the europe edition though.. don't think it matters,


    Yngwie II
  4. SlaveZero

    SlaveZero Guest

    good 4 u man :D
  5. XP Abuser

    XP Abuser Guest

    check the wires and calibrate your speakers
    also good tip dont get creative stuff they are ****e and they deny it