Sexo um Pato

I'm running a home network with an ADSL (512/128) connection.

The Internet goes into a winXP machine and is shared by ICS into a hub through the home network.

i don't have any router or firewall's set up (not even the XP one)

i can set up a listen server with UT 2004, however none of my friends can connect to me.

i believe the problem is that my machine on the network has an ip of 192.168.0.2, however my internet machine has an ip of 203.161.02.95. So when my friends try to connect to the 203.161.02.95, they can't connect to my actual computer on the network.

have i made this clear?

how can i set up my computer so that i can run a listen server and allow my friends to connect to me?

thanks,

Jeremy

mooo

pretty sure if you have to forward port to the main box, because it is getting the sends but doesn't know where to send it. I am not sure how to do this though, never really messed with ics

Electronic Punk

View the internet sharing settings and assign the particular port (the one it uses eludes me) to that particular IP.

---

Aussie983

there are also settings in the UT2004.ini file that u need to configure to tell the server that it is behind a firewall and cannot negotiate any other ports other than the ones given. There are some good ini generators out there including this one:

http://www.unrealadmin.org/modules.p...=INI_Generator

---

Electronic Punk

The OSNN UT2004 server was up for few minutes before I decided my ping sucked on it

---

Petros

I could start and OSNN server here in Korea...lol you'd all be pinging 500 or worse.

Electronic Punk

if I was lucky

---

Sexo um Pato

i believe the port is 7777, could i ask you to give me a step by step on how to do this please?

the ICS machine is running XP

toretto

port 7777 is the port it uses

---

Sexo um Pato

thanks, but im not sure how to set up and assign the port. can someone please step me through it?

vacantmind

any idea when the damn stats servers are going to be up?

Sexo um Pato

Originally Posted by Sexo um Pato

thanks, but im not sure how to set up and assign the port. can someone please step me through it?

see above?!!

hello?

Sexo um Pato

comeon guys and gals, this is crazy - can some one please help me with a short step by step on how to View the internet sharing settings and assign the port 7777 to my computers IP on my network so that i can host a UT 2004 server


?????????????//

mooo

ha in the amount of time you have been wondering, you could have went to microsoft.com and found the how to..

Sexo um Pato

whats the point of an online computer geeks forum (of which i am one) that doesnt help each other out?

toretto

Remember, do not type in the quotes...

On the machine running the ICS server (the first computer inline, after the modem)

1. Right Click your "My Network Places" icon and go to properties

2. Right click the connection that pertains to your internet connection and go to properties
3. Click the "advanced" tab on the top there

4. I assume you have the firewall enabled, look on the bottom right, click the "settings" button
5. Look on the bottom right of the window that opens, click the "add" button
another window opens

a: Under Description type in something like : "UT2K4 Server"
b: Under the "Name or ip address..." type: "192.168.0.2"
c: Under the "External Port Number..." type: "7777"
d: Under the "Internal Port Number..." type: "7777"

6. Click "OK" : Window closes

7. Click "OK" : Next window closes

8. Click "OK" : Last window closes

you can now close any other windows that my be open.

---

Sexo um Pato

much appreciated!

cheers

toretto

reputation points would rock right about now

---