Richy

i cant activate the DMA for my DVD (Pioneer 105SZ), i set it in the control panel (sec.contro./slave : to "DMA if Available", but it shows alwys -> PIO !)

where is the problem ? without the dma - mode i cant look DVDs with right speed (0.9x of the DVD-speed)

thx

Lonman

Go to Control Panel> System> 'hardware' tab> 'device manager' button> expand 'IDE ATA/ATAPI controllers' branch. You need to know which channel (primary or secondary) your dvd player is on, right click on the appropriate channel> properties> 'advanced settings' tab. You can select 'DMA if available' there.

Richy

i did it like that !!!!!!!!!!!!!!

but it looks like that : ->> DMA if available
->> PIO-Mode

i set it on DMA, but xp use the PIO - Mode !!!!!

whats the prob ???

Lonman

I would have to guess your drive won't support DMA mode for some reason or other. Go to Pioneer and see if they have any firmware updates for it. If that doesn't fix it, try updating your m/b bios.

Richy

found a solution, but .... look urself

first my config was like that :
ide1 -> 1 HDisk UDMA 100 (dma-mode 5 in xp)
ide2 -> Master 1 HDisk UDMA 66 (dma-mode 4 in xp)
Slave 1 DVD UDMA 33 -> but in xp only pio-mode !!

now: ide1 -> Master HDISK UDMA 100
-> Slave DVD UDMA 33
ide2 -> single HDisk UDMA 66

but now xp shows for the dvd -> DMA-Mode 2 !!! an it works good for dvd-films, no breaks etc.

but why it doenst work on the sec.ide controller ???

hm, bullsh...

Lonman

My guess is it's some kind of glitch with the chipset IDE drivers. Glad to hear you got it working.

Richy

yeap, i also think so ..... now i changed the ide-chanels , so i can use the fast drive as a single on ide2 for the better speed an the dvd as slave on ide1 ... and it works .... but its a little silly (i have the latest via chipset drivers ... what can i do)

mhm, dont know but if it works i do it like that.

gn8

Lonman

VIA has had a bear of time just getting there drivers to work at all. Give them more time is all I can suggest, they're bound to accidently get it right one of these days.

mavis

here's a solution that worked well for me...


Here is the original post.

Hope this helps, it worked for me! Got DMA back

mavis

Khayman

This worked for me also!

I had one drive that was PIO, and although it wasn't a problem i done the reg hack and now it DMA cool!

---

Richy

yes !!!!

it works, but now i dont have the tab "advanced options" for the sec.chan. ......
(until i update the drivers next time, i think)

pinkshark

I did the hack in the registry specified above, but it didn't worked for me :-(
try this if you're still in trouble :
http://www.xp-erience.org/forum/show...6830#post56830

morpheus2k

Check you BIOS - I couldn't even get an offer for DMA, until I checked in my BIOS and saw that the IDE Secondary Slave (were my DVD drive is), had UDMA "disabled" - so I enabled it and now it works great.